How do I get my printer out of an error state?

If your printer’s status displays “Printer in error state,” there may be a problem with the printer itself.

Asked on November 12, 2018 in Technology.
Add Comment
1 Answer(s)

If your printer’s status displays “Printer in error state,” there is also a tangle with the printer itself.
Make sure the printer is turned on and connected to your computer by Wi-Fi or cable. Check it for low paper or ink and make certain the quilt is not open, and therefore the paper is not packed.
Fixing Windows 10 “printer is in error state” once connected via an interface.
Problem:
You’ve simply put in or upgraded to Windows ten, and your printer connected via parallel interface refuses to figure, giving a slip message expression, “printer is in error state”.
Solution #1:
Go to the device manager, notice the parallel interface and double-click it to state the properties sheet. Click the “Port Settings” tab and so choose “Use any interrupt allotted to the port” and click on OK. The printer ought to be detected and work properly.
Solution #2:
In some cases, solution #1 seems to work but the problem returns when the computer is rebooted. In that case, changing the setting described above back and forth will cause it to work again, but only until the next reboot. After a significant amount of time troubleshooting this on a few computers, we’ve concluded that Windows 10 just doesn’t print reliably with parallel ports. In stubborn cases like this, we’ve resorted to getting a StarTech USB-to-parallel cable, which essentially makes the printer look to Windows like a USB printer. In all the cases we’ve run into, that has always solved the issue permanently. However, the brand of cable could make a difference. Use the best cable to connect your printer.

Answered on November 13, 2018.
Add Comment

Your Answer

By posting your answer, you agree to the privacy policy and terms of service.